Overview

Bootloader Designer is a professional tool for designing and generating custom bootloaders for ARM Cortex-M series MCUs. Through visual configuration, users can define boot sequences, firmware update mechanisms, and security features. Supports various OTA update protocols and cryptographic verification for secure boot.

Bootloader OTA Update Secure Boot

Supported ARM MCUs

STM32F0/F1/F4/F7/H7 NXP LPC/Kinetis NXP i.MX RT Nordic nRF52/nRF91 TI TM4C/CC26xx Microchip SAM GD32 MM32

Boot Sequence

Power-On

Reset Handler

→

Init

Clock & GPIO

→

Verify

CRC/Signature

→

Update?

Check Request

→

Jump

To Application

Capabilities

8KB
Min Boot Size
5+
OTA Protocols
256
Key Length
100%
Rollback Safe

Key Features

📡 OTA Updates

Support UART, USB, CAN, Ethernet, WiFi, BLE firmware updates.

🔐 Secure Boot

RSA/ECDSA signature verification, encrypted firmware support.

🔄 A/B Partition

Dual bank updates with automatic rollback on failure.

💾 External Flash

Support QSPI/OSPI external flash for firmware storage.

⚙️ Memory Layout

Visual flash partition editor with conflict detection.

🛡️ Watchdog

Built-in watchdog protection during update process.

Generated Code Example

Boot sequence main function:

// Auto-generated Bootloader Main
int main(void) {
    // 1. System initialization
    SystemClock_Config();
    GPIO_Init();

    // 2. Check for firmware update request
    if (Check_Update_Flag()) {
        if (OTA_Receive_Firmware() == SUCCESS) {
            if (Verify_Signature(&newFirmware)) {
                Flash_Write_App(&newFirmware);
            }
        }
    }

    // 3. Verify application integrity
    if (CRC_Verify_App(APP_ADDR, APP_SIZE)) {
        Jump_To_Application(APP_ADDR);
    }

    // Boot failed - enter recovery mode
    Enter_Recovery_Mode();
}