Overview
Protocol Debugger is a powerful tool for debugging and analyzing embedded communication protocols. It provides real-time protocol decoding, waveform analysis, and automated protocol reverse engineering. Supports all common embedded protocols with customizable protocol definitions for proprietary communications.
Supported Protocols
🔌 Serial Protocols
- UART/USART with auto-baud detection
- RS-485/RS-422 multi-drop
- LIN bus protocol
- Modbus RTU/ASCII
🔗 Wire Protocols
- SPI (Master/Slave modes)
- I2C with address scanner
- SWD/JTAG debugging
- 1-Wire protocol
🚗 Automotive
- CAN 2.0B / CAN-FD
- LIN 2.2A
- FlexRay
- SENT protocol
🌐 Network
- TCP/IP stack
- MQTT protocol
- CoAP protocol
- BLE GATT/ATT
Analysis Capabilities
50+
Built-in Protocols
100MHz
Max Sample Rate
16
Channels
1M
Buffer Depth
Key Features
Waveform View
Real-time waveform visualization with zoom and measurement tools.
Auto Decode
Automatic protocol detection and decoding from raw signals.
Reverse Engineering
AI-assisted protocol reverse engineering for unknown formats.
Custom Protocols
Define custom protocol decoders with visual editor.
Error Detection
Automatic detection of framing, parity, and timing errors.
Export & Share
Export captures to CSV, VCD, or share with team members.
Live Waveform Preview
Real-time SPI signal capture and decode:
CLK
MOSI
MISO
CS
Decoded: 0x8F 0x00 0x3A 0x55 0xFF | CMD: READ | ADDR: 0x003A | DATA: 0x55