Overview

Driver Studio is an intelligent tool for auto-generating ARM peripheral drivers. Simply import chip datasheets or SVD files, select required peripherals, and the tool automatically generates complete driver code including initialization, read/write operations, interrupt handling, and DMA integration. Supports all major ARM MCU vendors.

Driver Gen ARM Cortex Auto-Gen

Supported Driver Types

Communication

  • UART/USART
  • SPI (Master/Slave)
  • I2C (Master/Slave)
  • CAN/CAN-FD
  • USB Device/Host

GPIO & Timers

  • GPIO Input/Output
  • External Interrupts
  • Timer/PWM
  • RTC
  • Watchdog

Analog & Mixed

  • ADC (Multi-channel)
  • DAC
  • Comparator
  • OpAmp
  • DMA Controller

Generation Stats

500+
Peripherals
30+
MCU Vendors
10s
Gen Time
0
Bug Fixing

Key Features

📄 Datasheet Parser

AI-powered datasheet parsing extracts register definitions automatically.

⚡ DMA Integration

Auto-generate DMA-enabled drivers for high-throughput peripherals.

🔄 Interrupt Handlers

Complete ISR implementation with callback registration system.

📝 HAL/LL Layers

Generate both HAL abstraction and low-level register access layers.

🧪 Test Generation

Auto-generate unit tests and integration tests for drivers.

📦 Sensor Drivers

Pre-built sensor drivers for accelerometers, gyros, temp sensors, etc.

Generated Code Example

Auto-generated SPI driver for STM32F4:

// Auto-generated SPI Driver
typedef struct {
    SPI_TypeDef *Instance;
    uint32_t BaudRate;
    bool DMAMode;
} SPI_Config_t;

void SPI_Init(SPI_Config_t *config) {
    // Clock enable
    __HAL_RCC_SPI1_CLK_ENABLE();

    // Configure SPI
    config->Instance->CR1 = SPI_CR1_MSTR |
        SPI_CR1_BR_0 | SPI_CR1_CPOL |
        SPI_CR1_CPHA | SPI_CR1_SSM;

    // Enable DMA if configured
    if (config->DMAMode) {
        SPI_ConfigureDMA(config);
    }

    config->Instance->CR1 |= SPI_CR1_SPE;
}